Monday–Friday, 7:00 AM–6:00 PM and on Saturday, 7:00 AM–2:00 PM

Safe, dependable drying

Dryer repair in Des Plaines

Gas and electric dryer repair for no heat, drums that will not turn, unusual noise, and clothes that stay damp. Help for household dryers and stacked laundry units.

$89 diagnostic visit · Applied toward an approved repair.

Start with the symptom

A precise diagnosis starts before a part is changed

Restore heat, airflow, drum movement, and cycle control.

We look at the whole appliance system—power, airflow, water, heat, controls, installation, and mechanical components as needed—then explain the evidence behind the recommendation.

For washer and dryer repair, tell us which appliance needs attention. See our washing machine repair service for drainage, spin, or washing problems. If both appliances or a combined laundry unit need service, describe the setup and symptoms when you call or request an appointment.

  • Gas dryers
  • Electric dryers
  • Vented dryers
  • Compact dryers
  • Stacked laundry
Front-load dryer airflow system being checked with a meter

Common problems

When to schedule dryer repair

A symptom can have several causes. These are useful starting points—not a substitute for safe testing.

01

Runs but does not heat

02

Drum will not turn

03

Takes multiple cycles to dry

04

Squeals, thumps, or rattles

05

Stops early or will not start

How the visit works

Methodical from arrival to handoff

Every job follows a clear sequence, while the actual diagnostic path stays specific to the appliance and symptom.

01

Tell us what changed

Share the appliance, symptoms, model details, and a few timing options.

02

We confirm the visit

You receive a clear appointment window and preparation guidance.

03

Diagnosis on site

The technician inspects the appliance and isolates the failure before recommending work.

04

Approve the repair

We explain the finding and price so you can make an informed choice.

05

Test and handoff

The appliance is tested, the work area is left orderly, and care guidance is shared.

Before and after service

Safe checks now, better habits for the long run

Checks you can make safely

  • Clean the lint screen before every load.
  • Confirm the exterior vent flap opens during operation.
  • Stop use if the dryer or plug smells hot.
Disconnect power before accessible inspection. Stop immediately for gas odors, smoke, overheating, exposed wiring, or water near electrical parts.

Prevention and maintenance

  • Arrange periodic vent inspection and cleaning.
  • Keep the area around the dryer clear.
  • Do not overload the drum or dry unsuitable materials.
Maintenance guidance

Brands and coverage

Service for many popular appliance brands

Exact support depends on the appliance type, model, condition, and parts availability.

Frigidaire
GE
LG
Maytag
Whirlpool
Samsung
Hotpoint
Bosch
KitchenAid
Thermador
JennAir
Amana
Speed Queen

Manufacturer names and logos identify equipment we service. Ali Appliance Repair is an independent repair provider and is not affiliated with or endorsed by these manufacturers.

Explore service areas

Questions, answered

Frequently asked questions

Helpful context before you choose an appointment time.

Why does the dryer tumble but produce no heat?

The cause can differ between gas and electric models and may involve the power supply, heater, ignition system, thermal protection, airflow, sensor, or control. Share the fuel type when scheduling.

Why are clothes taking several cycles to dry?

Restricted venting, a clogged lint path, weak heat, a moisture-sensor issue, overloading, or washer spin performance can extend drying time. Check the lint screen and exterior vent flap without dismantling the dryer.

What should I do if the dryer smells hot or burnt?

Stop the dryer, disconnect power if it is safe to do so, and do not run another test cycle. Overheating, lint buildup, electrical trouble, a slipping component, or an item in the drum needs prompt evaluation.

What do squealing, thumping, or scraping sounds mean?

Rollers, bearings, belts, pulleys, blower parts, loose objects, or installation contact can create dryer noise. A recording and the point in the cycle when it happens can help with diagnosis.

Can the vent cause a dryer repair symptom?

Yes. A crushed, disconnected, or obstructed exhaust path can cause long cycles, excess heat, moisture, or shutdowns even when the dryer still tumbles. Vent condition is considered alongside appliance components.

What should I prepare for a dryer appointment?

Share the model number and fuel type, clear the top and surrounding area, and keep the outlet, gas shutoff if applicable, and exhaust connection accessible without moving the appliance yourself.

Related expertise

More ways we can help

Troubleshooting and care

Dryer repair guides

Learn about symptoms and routine maintenance before deciding whether to book a visit.

Ready when you are

Request dryer repair

Call to discuss the appliance problem, or request a preferred arrival window online. Our team will contact you to confirm scheduling.